Shipping in Canada

Pump Wet Ends

Pump Wet Ends

When you purchase a new wet end, it is complete all o-rings and parts, with the impeller and seal installed on the new wet end. A new wet end can usually be installed without taking it apart. You first line up the threads of the impeller with the threads of the motor shaft, and tighten by hand. Then, carefully hold the impeller, through the front threaded connection, with something plastic (be careful not to damage impeller), and tighten the shaft with the large flat screw on the back of the motor.

Need help determining if you have a 48 frame or 56 frame pump?


Products

 

  • Center Discharge Pump Wet End, Waterway

    Available in 3/4 HP, 1.0 HP, 1.5 HP, 2.0 HP. Can also replace Aqua Flo Flo-Master FMCP wet ends with the Waterway Center Discharge.

    310-21XX
    CAD $119.99
     
  • Executive 48 Frame Pump Wet End, Waterway

    Available in 1.0 HP, 1.5 HP, 2.0 HP, 3.0 HP & 4.5 HP.

    Available with 2.0" suction (measures 3.0" O.D. on threads) and with 2.5" suction (measures 3.5" O.D. on threads).

    310-1XXX
    CAD $95.99
     
  • Executive 56 Frame Pump Wet End, Waterway

    Available in 1.0 HP, 2.0 HP, 3.0 HP, 4.0 HP & 5.0 HP.

    Available with 2.0" suction (measures 3.0" O.D. on threads) and with 2.5" suction (measures 3.5" O.D. on threads).

    310-XXXX
    CAD $95.99
     
  • Tiny Might Pump Wet End, Waterway

    1" Thread Connections (measure 1-7/8" O.D. on threads) or 1/2" pipe (13/16" O.D. pipe) can be glued directly into wet end.

    310-9000
    CAD $62.99
     
  • Iron Might Pump Wet End, Waterway

    1.5" Thread Connections (measure 2-5/16" O.D. on threads). Also has inside threads.

    310-1000
    CAD $114.99
     
  • Flo-Master FMHP / Circ-Master CMHP Pump Wet End, Aqua Flo

    AquaFlo Flo-Master FMHP (3/4 HP, 1.0 HP, 1.5 HP, 2.0 HP) and Circ-Master CMHP (1/15 HP) Wet Ends.

    1-1/2" intake and discharge (Outside Diameter of threads is 2-5/16").

    91040XXX
    CAD $79.99