Executive 48 / 56 Pump Parts, Waterway
Most parts are interchangeable between Executive 48 frame & 56 frame pumps, however the volutes are different (#9 above) and be careful when selecting your impeller.
If you have a pump built before 2006, the current faceplates (#4 above) will not match up with older volutes (#9 above), and vice versa. If you have an older pump and require a faceplate or volute, you need to replace the complete wet end.
- 1
- 2
-
-
672-4350
3/8" Barb X 1/4" MPT
Adapter fitting for newer Waterway and Aqua Flo Pump Wet ends.
-
-
-
311-1220
#4 - 2.0" Faceplate for Waterway Executive Wet Ends. (2.0" threads measure 3.0" on the outside of the threads)
-
311-1210
#4 - 2.5" Faceplate for Waterway Executive Wet Ends. (2.5" threads measure 3.5" on the outside of the threads)
-
805-0261
#5 - O-Ring for the Volute on Waterway Executive 48 & 56 Frame Pumps.
-
319-1380
#6 - Wear Ring for 1 HP, 2 HP & 3 HP Waterway Executive Pumps.
-
319-1370
#6 - Wear Ring for 4 HP, 4.5 HP & 5 HP Waterway Executive Pumps.
-
310-4230
#7 - Impeller for 1.0 HP - 48 Frame Waterway Executive Pumps.
-
310-4220
#7 - Impeller for 1.0 HP - 56 Frame or 1.5 HP - 48 Frame Waterway Executives.
-
310-4210
#7 - Impeller for 2.0 HP - 56 Frame, 2.0 HP 48 Frame, or 3.0 HP - 48 Frame Waterway Executive Pumps.
-
310-4200
#7 - Impeller for 3.0 HP - 56 Frame or 4.5 HP - 48 Frame Waterway Executive Pumps.
-
310-4190
#7 - Impeller for 4.0 HP - Waterway Executive 56 Frame Pumps.
-
310-4180
#7 - Impeller for 5.0 HP - Waterway Executive 56 Frame Pumps.
-
PS-1000 / PSR1000V
Available in Standard Grade or Viton with Carbon.
PS-1000 / PSR1000V (PS-3865) Pump Seal Kit. Includes ceramic and metal seal.
-
-
-
313-1400
#10 - Slinger for Waterway Executive Wet End, Center Discharge and Hi-Flo Wet End.
-
310-1880
Available in 1.0 HP, 1.5 HP, 2.0 HP, 3.0 HP & 4.5 HP.
Available with 2.0" suction (measures 3.0" O.D. on threads) and with 2.5" suction (measures 3.5" O.D. on threads).