Quick Drain Hot Tubs & Spas

The quick & easy way to drain and clean any above ground water source! Works great for hot tubs, spas, pools, fountains, ponds and tanks.

Changing the water in your hot tub is an important and necessary part of owning a spa. Prolonged use of old, unbalanced water creates scale build-up and is corrosive to spa components. Frequent water changes allow spa chemicals to work properly, improves water chemistry and provides a fresher, cleaner and healthier spa experience.

The Quick Drain is Easy to Use!

• The Quick Drain is ready to use and no assembly is required.
• 12 foot discharge hose
• A few quick downward pumps starts your hot tub water draining in seconds.
• Is light weight and easy to maneuver.

Drains your Spa Water fast!

• Will drain 40 litres (10 gallons) per minute on average
• The system is virtually clog free as it quickly vacuums gravel, leaves, sand and other debris

Safe to use.

• No electricity is required.
• Contains no pumps or motors.
• Can be used in all weather conditions.

How can Quick Drain help?

The Quick Drain is a self-priming siphon that vacuums your hot tub as it drains. The siphoning action drains the spa water, creating suction to vacuum the debris from your tub.

In three easy steps, Quick Drain will clean your hot tub, spa or any above ground water source.

1. Insert the Quick Drain into your spa water and position the discharge hose so it lies below the bottom of the hot tub being drained.
2. Pump the Quick Drain up and down, with 15 long, fast strokes to establish water flow. To maximize flow, wait a minute and then pump 5 to 10 more times. If you like, move the Quick Drain to vacuum debris as it drains.
3. When the spa water level is low, angle and maneuver the hose to ensure all the water is completely drained