Ozonators & Ionizers
Hot Tub Ozonators & Parts
The use of a properly installed ozonator in your hot tub, will allow you to use far less sanitizers, non-chlorine shock, spa water clarifiers and defoamer chemicals. Hot tubs with ozonators will have cleaner and clearer water and you won't have to change the spa water as often. By reducing bromine or chlorine use by 60 - 90%, the water will feel nicer on your skin and eyes, and there will be much less of a chemical odor. An ozonator should run at least 3 hours in every 12 hour period, but you can run your ozonator up to 24 hrs a day for the best results. With a properly installed ozonator, you can keep the sanitizer level much lower than normal. Bromine can be kept as low as 1.5 ppm and Chlorine as low as 0.5 ppm. You won't have to add as much sanitizer to keep the sanitizer level adequate, because ozone is doing a lot of the purifying. Corona Discharge ozonators made by DEL Ozone, do not contain an ultraviolet bulb that requires replacing. These ozonators are powered by an electronic chip which is more reliable than a bulb & eliminates voltage spikes that can upset spa electronics. In addition, corona discharge ozonators save money because they use less energy than an ultraviolet generator. Last, water backup into a Corona Discharge ozonator, will generally not harm the internals. |
More about |
-
59297-KIT
Balboa Corona Discharge Ozonator - 110 / 240 Volts
Includes ozone tubing & check valve.
-
APG-U-01
Dual Voltage 110 - 120 Volts / 220 - 240 Volts (Auto Voltage Sensing).
-
CBI-350P-SAT-KIT
Mineral spa hydrotherapy at it's best! Hot water infused with minerals is relaxing, rejuvenating, and great for your skin.
Reduces bromine/chlorine and other chemicals by up to 90%. Universal Voltage (110V / 220V)
-
7-0356 Only 4 left in stock
The Mazzei Red #684K Ozone Injector is used on hot tubs with tiny circulation pumps.
3/4 Inch - Hose Barb Connections.
-
661454E
Tests for Copper, pH and Total Alkalinity.
Designed for use with ionization systems or mineral purification systems.
-
-
670-3010
A short piece of adapter tubing is included to accommodate 1/4" I.D. X 3/8" O.D. ozone tubing.
-
670-3000
For the water lines, 3/4" plumbing can be glued inside or a 1" fitting can be glued on the outside. The injector has a 3/8" barb for the ozone line. A short piece of adapter tubing is included to accommodate 1/4" I.D. X 3/8" O.D. ozone tubing.
-
7-1140-01
Ozonator Check Valve for 1/4" I.D. X 3/8" O.D ozone tubing.
It is a good idea to change your check valve every couple years.
-
GL900025038
1/4" I.D. X 3/8" O.D. quality ozone line.
Order the exact length you want. Price is per foot and will be cut accordingly.
-
211-0380
Ozonator Jet or Cluster Jet with 1/2" Slip or 1" Spig connection for water.
-
212-0590
Ozonator Jet or Cluster Jet with 3/4" Slip connection for water.
-
215-9860
Front Wall Fitting (Jet Internal) for Waterway Ozone / Cluster Jets. 1.5" Face Diameter.