Shipping in Canada

PuraSpa LF-3000 Spa Control System (Low Flow Dedicated Circ Pump Required)

PuraSpa LF-3000 Spa Control System (Low Flow Dedicated Circ Pump Required)

  • Includes Gecko in.k35 Topside Control Panel.
  • Low Flow Spa Control System built on Gecko Y Series Platform.
CAD $1249.00
- Main Power
- Circ Pump Circuit
- 2 Speed Pump Circuit
- Pump 2 Circuit
- Blower Circuit
- Ozone Circuit
- Audio/Video Circuit
- WiFi

  • Product Description
  • Send to Friend

Gecko Y Series Platform Wi-Fi Enabled Gecko In.Touch 2 Wi-Fi Module Kit).

This system will operate:

  • **Circulation Pump Circuit - 110V or 220V (a dedicated Low Flow Circulation Pump is required to run this system)
  • Main Pump Circuit (2-Speed) - 110V or 220V
  • Pump 2 Circuit (1-Speed) - 110V or 220V
  • Blower Circuit (1-Speed) - 110V or 220V
  • Ozonator Circuit - 110V or 220V
  • Light Circuit - 12 Volts
  • Audio/Video Circuit - 110V or 220V
  • Will connect to a Gecko IN.Touch Wi-Fi Module Kit

** This system is designed to work with a small, dedicated circulation pump, like a Laing E10 Circulation PumpWaterway Tiny Might or Grundfos, but will also work with larger circulation pumps including the Waterway Iron Might or Aquaflo Circmaster.

Includes all these features:

Includes Gecko IN.K35 Topside Control Panel.

  • Includes Vertical Low Flow Canister Heater (Long life Titanium 4.5 kW heater element is replaceable separately). Heater canister measures approximately 6" x 4" x 12" high.

  • Control System Box (measures 12" wide x 10.5" high x 4" deep) built with the proven Gecko Y-Series circuit board and IN.K35 Topside Control (measures 7" X 3-1/4"). Includes adapter plate for use if you currently have a larger top-side control.

  • Color coded cords that plug-in on the outside of the Control System Box (spa pack). This eliminates the confusion of where to plug components in (other new systems on the market force you to turn the power off, slide the cord through the side of the box, consult a wiring diagram and then plug directly into the board). Our system is much easier and eliminates costly mistakes.

  • 'Heater On' Indicator Light - When lit, the heater element is getting voltage. This is very helpful when troubleshooting set-up issues and helps to identify faulty parts. 

  • Includes Flow Switch Assembly to prevent the heater from operating without proper water flow (eliminates troublesome pressure switches).

  • Solid state electronic components and circuitry, for increased reliability and accurate temperature settings.

  • PuraSpa® control systems are engineered for easy installation and convertible for all voltage configurations. This spa pack can be wired to 110 Volts or 220 Volts. If you wire to 220 Volts for the main power supply, all component circuits can be configured for 110 Volts or 220 Volts.

  • Universal features - main power convertible for either 110V or 220V service supply.

  • PuraSpa's cords are color coded, which makes plugging in your pump and other components failsafe. Our receptacles are located on the outside of the pack box, so there is no need to turn off the power, or open the electrical box to plug and unplug components.

  • Universal 2-speed pump circuit - supports 110V or 220V (color coded 48" Cord included).

  • Universal 1-speed pump circuit - supports 110V or 220V (color coded 48" Cord included).

  • Universal 1-speed blower circuit - supports 110V or 220V (color coded 48" Cord included).

  • Universal Ozonator circuit - supports 110V or 220V (color coded 48" Cord included).

  • Audio/Video circuit - supports 110V or 220V (when added, we include the male amp style cord).

  • Full range solid state thermostat for precision accuracy.

  • 12V Light circuit with 96" cord.

  • Freeze protection mode - if a low temperature is sensed the pumps and blower will purge the system every two hours in addition to the set filtration cycles.

  • Heater ON indicator light.

  • Automatic time-out for light and pump.

  • Foot mounting brackets.

  • Compact design for easy installation.

  • UL, cUL and ETL recognized.

  • Wi-Fi Enabled (with the addition of a Gecko INTOUCH 2 Wi-Fi Module Kit). You have the option of adding the Wi-Fi kit at a reduced price above or you can purchase later separately

Valuable items included:

  • Digital topside control with adapter plate (use the adapter plate if replacing a larger topside).
  • Vertical Low Flow Canister Heater.
  • Color coded equipment cords.
  • Flow Switch assembly. 
  • Installation and operation manual.

Universal Electrical Features Explained: Your spa pack will be factory configured to the voltage specifications you provide above. However, the main service and individual component voltages can be easily changed if your needs change in the future. If you do not have an ozonator, the voltage does not to be specified upon ordering. You will still receive the ozonator circuit so you have the option of adding one to your spa pack in the future. (Pumps and ozonators for the above system are sold separately. You are only selecting the voltage for these components when adding the pack to your shopping cart.)

Note: This control system must be hooked up to a GFCI protected line.

Backed by a 2 year manufacturer's warranty on all parts.

Send to Friend

Your name
Your email
Recipient's email
Add a personal message