Detailed Instructions to Order a Square or Rectangle Hot Tub Cover:
Step 1: Provide Fold Direction & Measurements for your cover.
Select the Fold Direction and provide your measurements for A & B. If you are measuring your hot tub, it is best to add a 1/2 inch, so your cover comes on and off easily. Double check your dimensions and that they match with the Fold Direction selected.
Please contact us if your cover is over 96" in either direction.
Step 2: Provide the Make & Model of your Hot Tub.
This information is not required, but provide if known.
Step 3: Select your Cover Choice.
The thickness of your spa cover is personal preference, but thicker is stronger and has a higher insulation value.
The Classic (R10), Premier (R14) & Extreme Covers (R18) are all made with 1.5 lb High Density Expanded Polystyrene Foam (EPS). The Extreme "Walk-On" Cover (R21) is made with the highest density 2.0 lb foam, for maximum strength and R-Value (insulation value).
Step 4: Select Optional Cover Upgrades.
Our covers come standard with a 4 mil thick Vapour Barrier, heat sealed on each foam insert. A 4 mil barrier is very good, but we also offer options to further protect your inserts from absorbing water.
Last Step: Select your Colour (click here for large cover colour images).