Gecko YJ Control System Bundle
Includes YJ-3 Control System, IN.YJ Remote Heater, IN.K300 Topside Control, Light
Includes YJ-3 Control System, IN.YJ Remote Heater, IN.K300 Topside Control, Light. Same as part number 0612-300001.
Can be wired to 220V or 110V. If the main power is 220V, then all components can be configured for 110V or 220V.
This system will operate:
- Main Pump Circuit (1 or 2-Speed) - 110V or 220V
- Pump 2 or Blower Circuit (1-Speed) - 110V or 220V
- Ozonator Circuit - 110V or 220V
- Light Circuit - 12 Volts
- **Circulation Pump Circuit - 110V or 220V
**Most spas don't have a small circulation pump, instead, the main pump runs on low speed to heat and filter the water during set filtration cycles. If you are using a small circulation pump, the flow rate must be at least 20 gallons per minute. In other words, the circulation pump must be similar to a Waterway Iron Might or Aquaflo Circmaster Pump and require a minimum 1.5" size plumbing. Pumps like the Waterway Tiny Might or Laing E10 Circulation Pump are too small and will not work with this control system.
Includes:
Control System: in.yj-3 (0612-221041-431)
Heater: 4kW (0613-421009)
Keypad: in.k300-1OP (BDLK3001OP)
Cables: AMP 2SPD receptacle (9920-401345)
QC to QC dual speed (95100251)
Light (9920-400489) and white LED bulb (246AA0064)
k300 Adaptor plate (9917-10239)
2 x Mounting Bracket & screw kit (9920-101490)