Spa Marvel Cleanser

Spa Marvel Cleanser

Spa Marvel Cleanser is a fast-acting proprietary formula, that deep cleans spa plumbing and equipment, removing: 

• biofilm
• organic contaminants
• mineral deposits
• chemical buildup

Clearing the internal buildup in your plumbing:

• Extends life of pumps, heaters, jets and plumbing
• Improves water quality and clarity
• Allows sanitizers and water-care products to work effectively

Instructions:

1. Open jets and water features – Make sure water is circulating through all lines.
2. Remove filters 
3. Pour 1 bottle of Spa Marvel Cleanser into the existing water (3 bottles in a swim spa). 
4. Turn pumps on high for at least 1 hour. If the spa is less than 3 months old, or if Spa Marvel Water Treatment has been used in the existing water, drain the spa after 1 hour. Otherwise, leave the Cleanser in the water for at least another 23 hours on the regular filtration cycles. Do not allow bathers to enter the spa with Cleanser in the water or with the filter(s) not installed. 
5. Drain spa, rinse out and refill as per manufacturer’s directions. 
6. Repeat before every water change.